The easiest and quickest way to get started with Programmable Wireless connectivity for your IoT (Internet of Things) devices is to use Machine to Machine commands.
With the simple steps in this Quickstart, we will show you how you can send and receive text-based commands using the FONA 3G development board.
While most of your code will be transferable, new product development for 2G in the United States is not a good choice. 2G networks in the United States are being deprecated. For new product development, we suggest researching alternatives or discussing your idea with the Twilio Programmable Wireless team.
- Sign up for a Twilio account.
- Purchase your first SIM cards for Twilio Programmable Wireless.
- Insert your SIM card into the Adafruit FONA 3G development board.
- Power, connect and flash the board.
- Send a Machine to Machine command from the Adafruit FONA 3G and read it in the Wireless Console.
- Receive a Machine to Machine command on the Adafruit FONA 3G.
Already have a Twilio account and a SIM card? Skip ahead to the register and activate step by clicking the button at the end of this section.
Before you can connect with Twilio Programmable Wireless, you'll need a Twilio Account and a SIM card.
After you have signed up, then purchase a set of 3 starter SIMs:
Orders of 10+ SIMs will be delivered with the SIM cards already registered to your account.
Detailed information about ordering SIMs is available here.
Once you receive your SIM shipment, pick a favorite and unpack it.
In the Console, open the Register a SIM page in the SIMs section of the Programmable Wireless menu and enter the registration code as instructed:
Next, pick a distinct Unique Name for this SIM.
Select a Rate Plan from the options provided by Twilio.
We have created data metering quotas that are optimized for both high and low usage devices. You can use our data usage estimator to find the right Quota for you. Rate Plans also let you control every aspect of what your device can do with data, voice, and messaging.
For this quickstart, you can choose a low volume plan but ensure the plan you choose includes messaging.
When you're happy with the name and plan, Activate the SIM card.
Detailed information about registering and activating SIMs is available here.
For the quickstart, we will use an Arduino UNO to communicate with the FONA 3G. In the next steps, we will demonstrate how to prepare the device for cellular connectivity.
We need to solder pin headers to the FONA 3G board. The Adafruit website covers this step of the project within their FONA tutorial.
After soldering the FONA 3G header pins, place the board on a breadboard. Using hook-up wires, connect the pins noted below to the Arduino UNO.
3G FONA ----- Arduino UNO
5V ------------ 5v
GND ---------- GND
KEY ----------- GND
RST ----------- 4
TX ------------ 3
RX ------------ 2
Punch out the large form factor of the Twilio SIM from the card and insert into the SIM slot. Note the SIM orientation in the image below.
Carefully attach the antenna to the FONA 3G like in the image below.
Plug the Lipoly Battery into JST connector. For the best chances of connectivity keep the battery attached during use.
Connect the Adafruit FONA 3G to a computer using a Micro-USB cable.
The hardware setup will look similar to the image below.
- From the Tools menu, select Board > Board Manager.
- Search for the Adafruit AVR Boards package and install the latest version of the package.
- Restart the Arduino IDE.
You can download the code directly from this directory on Github.
- Load the file
m2m_command_fona3g.inointo the Arduino IDE. Alternately, you can copy/paste the code into a new Arduino sketch using File > New Sketch.
- Power the Adafruit FONA 3G by connecting it to the computer using a Micro-USB cable.
- Select your board and the serial port it enumerates from Tools > Board > Arduino UNO in the Arduino IDE.
You have a choice:
- One way is to use the Upload button on the toolbar
- Another is to select Upload from the Sketch Menu.
After uploading the code, open the Serial Monitor from the Tools menu.
And that's all you need to do on the Arduino side! Watch the monitor and you should see the modem come online:
If you don't see the above, make sure the power is connected and you have set the speed set to 115200 baud. Power cycle or hit the reset button on the Adafruit board to have it spin through again.
Let's look at how the message was sent in the next section and to send a response from our computer.
We've included a very small helper library to assist with sending M2M commands. Here's the method to send a machine to machine command:
Behind the scenes, we send an SMS to the shortcode 2936. The Serial Monitor will print the following message when the Command is successful from the FONA 3G.
The easiest way to check if the command was successful is through the Programmable Wireless Console.
- Within the Console, select SIMs from the Programmable Wireless menu.
- Click the SIM we are using for this project, then navigate to the Commands tab.
- Copy the SIM Sid.
As you might guess, we will implement the reverse - you'll receive an inbound SMS from 2936 on the FONA 3G triggered by an API call using the SIM's Sid. Let's look at that next.
Sending (or in this case, manually responding to) a Machine to Machine command is very straightforward from your development machine.
The fastest way to respond to a command is to use cURL. Send a command (under 160 ASCII characters) back to the SIM using cURL:
curl -X POST https://wireless.twilio.com/v1/Commands -d 'Sim=DEXXXXXXXXXXXXXXXXXXXXXXXXXXXX' -d 'Command=hello from cURL' -u 'ACXXXXXXXXXXXXXXXXXXXXXXXXXXXX:YOUR_API_KEY'
Otherwise, commands can be sent from our helper library:
Again, we've included code to help you receive the M2M command easily.
Return to the Arduino IDE and test it out.
Reset or power cycle the Adafruit FONA 3G, open the Serial Monitor, and you should see...
And that's all there is to Machine to Machine commands. You now know how to send Commands from an Adafruit FONA 3G and check their status in the console. You can also return a message from your machine and have seen how to receive it.
With those basic building blocks, you're ready to build the next big IoT Thing!
Now that you have seen how to send and receive Machine to Machine commands on both your Adafruit FONA 3G and development machine, you're ready for your custom application. Here are some possible ideas to take it to the next level:
- Try full end-to-end applications with Twilio Wireless Blueprints
- Dig into the Programmable Wireless API
- See all Programmable Wireless Guides and Tutorials
誰しもが一度は考える「コーディングって難しい」。そんな時は、お問い合わせフォームから質問してください。 または、Stack Overflow でTwilioタグのついた情報から欲しいものを探してみましょう。