メニュー

Expand
Rate this page:

Thanks for rating this page!

We are always striving to improve our documentation quality, and your feedback is valuable to us. How could this documentation serve you better?

Virtual Private Network

Interconnect VPN allows you to establish a virtual point-to-point connection to Twilio with IPSec tunnels that provide the functionality, security, and management policies of a private network. All you need is an IPsec VPN gateway with connection to the Internet.

Network Requirements

Your end

VPNゲートウェイ

A network device (e.g. router, firewall) supporting IPSec protocol suite. The device needs to have an interface on the internet and be assigned an IPv4 address which is globally addressable/routable on the Internet.

Encryption Domain (IP routes)

One or more of your IP networks that will have access to Twilio. Your border devices (e.g. IP-PBX, SIP-PRI IAD, Session Border Controller, NAT gateway, etc.) will reside in these networks. in other words, these are the IP Addresses of the networks where you want them to communicate with Twilio through the IPSec tunnel.

Note that your Encryption Domain (IP routes) have to be globally unique ("public IPs") - as opposed to RFC 1918 address ranges - to avoid conflicts with other networks that Twilio platform is peered with. In other words, your IP routes have to be outside of the following ranges:

  • 10.0.0.0 - 10.255.255.255
  • 172.16.0.0 - 172.31.255.255
  • 192.168.0.0 - 192.168.255.255

Firewall

The computer system (physical hardware device or a virtual machine perfromaing those tasks) that monitors and controls the flow of traffic in and out of your network (incoming and outgoing traffic). The firewall will have to allow your border devices to communicate with Twilio network.

IP Whitelist

In order for various Twilio products to function properly, you need to whitelist Twilio's IP addresses on your side and on your firewall. Please see here for further details.

Twilio's end

VPNゲートウェイ

Twilio has VPN gateway(s) at each Twilio Interconnect Exchnge location.

Encryption Domain (IP routes)

All Twilio signaling and media traffic will be initiated from fixed IP networks. Each Twilio Interconnect location has its own unique IP routes.

Twilio's VPN gateway and Encryption Domain details wil be provided to you once you sign up for a VPN connection.

Twilio Interconnect VPN connection

Twilio will provision bandwidth for your connection at the Twilio Exchange location specified by you. See connection bandwidth and location options listed here. For high availability, we strongly recommend connecting to at least two of our geographically redundant Twilio Interconnect locations. For example, you can select a 100-Mbps connection in Ashburn, Virginia and a 100-Mbps connection in San Jose, California to create redundant connections to Twilio on both coasts of the United States. Simialrly, this can be accomplished by having connections to London and Frankfurt in Europe and Singapore and Tokyo or Sydney in the APAC region.

IPsec pre-shared key

TwilioはIKE フェイズI 認証用に事前共有キーを発行し、それをセキュアな通信チャネル経由でユーザーに送信します。 

Twilio へのプライベート接続の設定

Step 1: Twilioオンボーディング・コンタクトに下記をご連絡ください

  • Desired connection location and bandwidth
  • Your VPN gateway IP
  • your Encryption Domain (IP routes)
  • your Twilio account SID
  • Email address to send pre-shared key (PSK) to via secure file exchange

Step 2: Receive IPSec VPN specification and pre-shared key (PSK) from Twilio

Your on-boarding contact at Twilio will share our IPSec VPN specification and your pre-shared key (PSK).

ステップ 3:IP Sec トンネルを起動する

Configure your VPN gateway using Twilio's IPSec VPN specification and your unique PSK from the above. Advertise Twilio IP routes to your internal network (i.e reverse route injection). This will allow your SIP-enabled elements route traffic to Twilio.

次のステップ

Rate this page:

ヘルプが必要ですか?

誰しもが一度は考える「コーディングって難しい」。そんな時は、お問い合わせフォームから質問してください。 または、Stack Overflow でTwilioタグのついた情報から欲しいものを探してみましょう。